MCS Test Equipment Ltd are the UK distributors for Willtek, Tescom, Schomandl and Litepoint. We offer a wide range of leading edge test equipment products to meet the testing requirements of most wireless and Broadcast standards such as GSM, WCDMA, TETRA, WLAN 802.11, Bluetooth and WiMax 802.16. As well as offering test equipment sales, MCS also has a wide range of rental test equipment and used test equipment available.We provide high quality used test equipment for sale or rental and tailor our services to meet your individual needs.
A continuity tester is an item of electrical test equipment used to determine if an electrical path can be established between two points; that is if an electrical circuit can be made. The circuit under test is completely de-energized prior to connecting the apparatus.
The tester consists of an indicator in series with a source of electrical power - normally a battery, terminating in two test leads. If a complete circuit is established between the test-leads, the indicator is activated.
The indicator may be a electric light or such a device might also be fitted with a buzzer. This led to the term "buzzing out a circuit" (which means to test for continuity). This term remains in use today, although any sound produced is usually made by the beeper function on a modern digital voltmeter.
A popular design has the tester combined with a standard flashlight. A TRS connector or jack plug in the rear of the unit permits a set of test leads to be plugged in effecting a quick conversion between the two applications.
For situations where continuity testing must be done on high resistance circuits, or where delicate conductors and sensitive components that might be damaged by excessive current are present, a low voltage, low current device must be used. These typically use an op-amp and watch batteries to drive a LED as an indicator. These testers can be exquisitely sensitive; for example they will indicate if the test points are taken by both hands.
There are times when a simple continuity test fails to reveal the problem. For example, vibration-induced problems in automobile wiring can be extremely difficult to detect because a short or open is not maintained long enough for a standard tester to respond.
In these applications a latching continuity tester is used. A more complex device, it detects intermittent opens and shorts as well as steady-state conditions. These devices contain a fast acting electronic switch (generally a Schmitt trigger) forming a gated astable oscillator which detects and locks (latches) the indicator on an intermittent condition with a duration of less than a millisecond.
Our success is based upon providing the highest levels of customer service in the test equipment marketplace. Everyone in our technical team has extensive test equipment experience and will provide you free unbiased advice.
We have over 2,000 pieces of new and used test equipment to choose from. If we haven’t got it in stock, we’ll try our very best to source it for you.
Should you wish to look at our test equipment sales or rental services, we will be pleased to help. Our test equipment rates are competitive with the best suppliers in the UK.
Our new Sales and Rental Test Equipment catalogue is now available, If you would like a copy please click here
Test Equipment Products
We are constantly updating our database of test equipment products, click on any of the following manufacturers to browse our latest items:
Acterna/JDSU, Adret, Advantest, Agilent - HP, AH Systems, Amplifier Research, Ando, Anritsu, AOIP, Audio Precision, Austrian Research, Bird, BMI, Boonton, Bruel & Kjaer, California Instruments, CEM, Chauvin Arnoux, Chroma, Climats, Convergie, Divers, Dranetz, Druck, EA, Efratom, EIN, EIP, ELC, Elgar, EM Test, EMCO, Enertec, Exfo, Flir, Fluke, FUG, Fujikura, Furukawa, GE Programma, Gigatronics, GMC, Goerz, Gould Nicolet, Hameg, Hioki, IFR-Aeroflex, Instek, Intec, Itech, Itronix, Kalmus, Keithley, Kepco, Kikusui, Kimo, Kyoritsu, Lambda, LECroy, LEM, Litepoint, Marconi, Mastech, MCP, Metrix, Microlab, Microtest, Milmega, Multimetrix, Narda, NetTest, Niton, Noisecom, Ophir, Panasonic, Philips, PMM, Powerbox, Prolabo, Promax, Protek, Racal, Raytek, Rigol, Rohde & Schwarz, Rotronic, Sample Instruments, Schaffner, Schlumberger, Schomandl, Secasi, Sefelec, Sefram, Solartron, Sony, Sorenson, Spinner, Stanford Research, Sunrise telecom, Svantek, Systron Donner, Tabor, Teac, Tegam, Tektronix, Tescom, Testo, Thomson, Toellner, Trend , TRT, TTI, USB Instruments, Varian, Veriwave, Voltech, Voltsch, Votsch, W/G Acterna, Wavetek, Western Graphtec, Willtek, Xantrex, Yokogawa,
If you are interested in the rental, purchase or lease of a product by a test equipment manufacturer that is not listed above then please contact us.
Looking for more information on Test Equipment?